Some comparisons between mining-induced and laboratory earthquakes   总被引：3，自引：0，他引：3  

A. McGarr 《Pure and Applied Geophysics》1994,142(3-4):467-489

Although laboratory stick-slip friction experiments have long been regarded as analogs to natural crustal earthquakes, the potential use of laboratory results for understanding the earthquake source mechanism has not been fully exploited because of essential difficulties in relating seismographic data to measurements made in the controlled laboratory environment. Mining-induced earthquakes, however, provide a means of calibrating the seismic data in terms of laboratory results because, in contrast to natural earthquakes, the causative forces as well as the hypocentral conditions are known. A comparison of stick-slip friction events in a large granite sample with mining-induced earthquakes in South Africa and Canada indicates both similarities and differences between the two phenomena. The physics of unstable fault slip appears to be largely the same for both types of events. For example, both laboratory and mining-induced earthquakes have very low seismic efficiencies where _a is the apparent stress and is the average stress acting on the fault plane to cause slip; nearly all of the energy released by faulting is consumed in overcoming friction. In more detail, the mining-induced earthquakes differ from the laboratory events in the behavior of as a function of seismic momentM ₀. Whereas for the laboratory events 0.06 independent ofM ₀, depends quite strongly onM ₀ for each set of induced earthquakes, with 0.06 serving, apparently, as an upper bound. It seems most likely that this observed scaling difference is due to variations in slip distribution over the fault plane. In the laboratory, a stick-slip event entails homogeneous slip over a fault of fixed area. For each set of induced earthquakes, the fault area appears to be approximately fixed but the slip is inhomogeneous due presumably to barriers (zones of no slip) distributed over the fault plane; at constant , larger events correspond to larger _a as a consequence of fewer barriers to slip. If the inequality _a / 0.06 has general validity, then measurements of _a =µE _a /M ₀, where is the modulus of rigidity andE _a is the seismically-radiated energy, can be used to infer the absolute level of deviatoric stress at the hypocenter.  相似文献   

Micromechanics of the velocity and normal stress dependence of rock friction   总被引：1，自引：0，他引：1  

Weibin Wang  Christopher H. Scholz 《Pure and Applied Geophysics》1994,143(1-3):303-315

Among the second-order effects on friction the most important are those of variable normal stress and of slip velocity. Velocity weakening, which is usually considered the source of the stick-slip instability in rock friction, has been observed in velocity stepping experiments with Westerly granite. The friction change, , was –0.01 to –0.008 for a tenfold velocity increase. Using normal closure measurements, we observed dilation upon each increase in sliding rate. We also observed, for the first time, time-dependent closure between surfaces during static loading. The dilation that occurred during the velocity stepping experiment was found to be that expected from the static time-dependent closure phenomenon. This change in closure was used to predict friction change with an elastic contact model. The calculated friction change which results from a change in contact area and asperity interlocking, is in good agreement with the observed velocity dependence of steady-state friction. Variable normal stress during sliding has two effects, first in creating new partial slip contacts and locking some existing fully sliding contacts and second in increasing interlocking, for instance when normal load is suddenly increased. As a result, a transient change in friction occurs upon a sudden change in normal load.  相似文献   

Probabilistic seismic hazard zonation of Syria     

Abdallah I. Husein Malkawi  Robert Y. Liang  Jamal H. Nusairat  Azm S. Al-Homoud 《Natural Hazards》1995,12(2):139-151

Earthquake hazard maps for Syria are presented in this paper. The Peak Ground Acceleration (PGA) and the Modified Mercalli Intensity (MMI) on bedrock, both with 90% probability of not being exceeded during a life time of 50, 100 and 200 years, respectively are developed. The probabilistic PGA and MMI values are evaluated assuming linear sources (faults) as potential sources of future earthquakes. A new attenuation relationship for this region is developed. Ten distinctive faults of potential earthquakes are identified in and around Syria. The pertinent parameters of each fault, such as theb-parameter in the Gutenberg-Richter formula, the annual rate ₄ and the upper bound magnitudem ₁ are determined from two sets of seismic data: the historical earthquakes and the instrumentally recorded earthquake data (AD 1900–1992). The seismic hazard maps developed are intended for preliminary analysis of new designs and seismic check of existing civil engineering structures.  相似文献   

Using numerical modelling to evaluate tsunami hazard near the Kuril Island     

L. B. Chubarov  Yu. I. Shokin  K. V. Simonov 《Natural Hazards》1992,5(3):293-318

A sequence of computer experiments is used to study questions concerning the tsunami problem as a quantitative estimate of tsunami danger, detailed geographical tsunami classification, determination of the parameters of critical tsunami waves, and the conditions of their development. We call a wave critical, if its impact on the coast is most hazardous.Using the Middle Kuril Island as an example, we present the results of a computer experiment which includes determining the wavefields on the shelf and estimating the effects connected with the deep-water Bussol and Diana Straits.Numerical simulation of tsunami waves of different sources permits the assessment of the extent of tsunami danger in different areas of the coastal zone of Simushir Island, depending on the location of the focus zone and their geometry.The major singularities of the wavefield arise in the zones of the deep-water straits. The distribution of the amplification factors is determined by both the global parameters of the wavefields and the local properties of individual harbours. The results obtained for a particular harbour in the northern part of Simushir Island, formed the basis for the quantitative estimate of tsunami danger for this area.  相似文献   

The concentration and distribution of different mercury species in the water columns and sediment of Aha Lake     

Weiyang BAI Xinbin FENG Xuewu FU Tianrong HE Guangle QIU 《中国地球化学学报》2006,25(B08):154-154

In order to find out whether Aha Lake was polluted by the acid mining waste water or not, the concentration and distribution of different mercuryspecies in the water columns and sediment profile collected from Aha Lake were investigated. It was found that discernible seasonal variation of different mercury species in water body were obtained in the Aha Reservoir. With regards to the whole sampling periods, the concentrations of HgP in the Aha Reservoir water body were evidently correlated to the concentrations of total mercury, showing that total mercury was mostly associated with particle mercury. The concentrations of methylmercury in water body were also evidently correlated to the concentrations of dissolved mercury. The dissolved mercury evidently affects the distribution and transportation of methylmercury. However, there is no correlation between methylmercury and total mercury. The dissolved mercury, reactive mercury, dissolved methylmercury levels in the water body of high flow period were much higher than those in low flow period. The distribution, speciation and levels of mercury within the Aha Reservoir water body were governed by several factors, such as the output of river, the release of sediment . Discernible seasonal variation of total mercury and methylmercury in porewater was described during the sampling periods, with the concentrations in high flow period generally higher than those in low flow period. The methylmercury in pore water column was evidently correlated to that of the sediment. The results indicated that highly elevated MeHgD concentrations in the porewater were produced at the depths from 2 to 5 cm in the sediment profile, and decreased sharply with depth. A positive correlation has been found between MeHgD formation and sulfate reducing bacterial activity. These highly elevated concentrations of MeHgD at the intersurface between waters and sediments suggest a favorable methylation condition. Moreover,  相似文献   

Aftershocks series monitoring of the September 18, 2004 M = 4.6 earthquake at the western Pyrenees: A case of reservoir-triggered seismicity?     

M. Ruiz  O. Gasp  J. Gallart  J. Díaz  J.A. Pulgar  J. García-Sansegundo  C. Lpez-Fernndez  J.M. Gonzlez-Cortina 《Tectonophysics》2006,424(3-4):223

On September 18, 2004, a 4.6 mbLg earthquake was widely felt in the region around Pamplona, at the western Pyrenees. Preliminary locations reported an epicenter less than 20 km ESE of Pamplona and close to the Itoiz reservoir, which started impounding in January 2004. The area apparently lacks of significant seismic activity in recent times. After the main shock, which was preceded by series of foreshocks reaching magnitudes of 3.3 mbLg, a dense temporal network of 13 seismic stations was deployed there to monitor the aftershocks series and to constrain the hypocentral pattern. Aftershock determinations obtained with a double-difference algorithm define a narrow epicentral zone of less than 10 km², ESE–WNW oriented. The events are mainly concentrated between 3 and 9 km depth. Focal solutions were computed for the main event and 12 aftershocks including the highest secondary one of 3.8 mbLg. They show mainly normal faulting with some strike-slip component and one of the nodal planes oriented NW–SE and dipping to the NE. Cross-correlation techniques applied to detect and associate events with similar waveforms, provided up to 33 families relating the 67% of the 326 relocated aftershocks. Families show event clusters grouped by periods and migrating from NW to SE. Interestingly, the narrow epicentral zone inferred here is located less than 4 km away from the 111-m high Itoiz dam. These hypocentral results, and the correlation observed between fluctuations of the reservoir water level and the seismic activity, favour the explanation of this foreshock–aftershock series as a rapid response case of reservoir-triggered seismicity, burst by the first impoundment of the Itoiz reservoir. The region is folded and affected by shallow dipping thrusts, and the Itoiz reservoir is located on the hangingwall of a low angle southward verging thrust, which might be a case sensible to water level fluctuations. However, continued seismic monitoring in the coming years is mandatory in this area to infer more reliable seismotectonic and hazard assessments.  相似文献   

A way to synchronize models with seismic faults for earthquake forecasting: Insights from a simple stochastic model     

lvaro Gonzlez  Miguel Vzquez-Prada  Javier B. Gmez  Amalio F. Pacheco 《Tectonophysics》2006,424(3-4):319

Numerical models are starting to be used for determining the future behaviour of seismic faults and fault networks. Their final goal would be to forecast future large earthquakes. In order to use them for this task, it is necessary to synchronize each model with the current status of the actual fault or fault network it simulates (just as, for example, meteorologists synchronize their models with the atmosphere by incorporating current atmospheric data in them). However, lithospheric dynamics is largely unobservable: important parameters cannot (or can rarely) be measured in Nature. Earthquakes, though, provide indirect but measurable clues of the stress and strain status in the lithosphere, which should be helpful for the synchronization of the models.The rupture area is one of the measurable parameters of earthquakes. Here we explore how it can be used to at least synchronize fault models between themselves and forecast synthetic earthquakes. Our purpose here is to forecast synthetic earthquakes in a simple but stochastic (random) fault model. By imposing the rupture area of the synthetic earthquakes of this model on other models, the latter become partially synchronized with the first one. We use these partially synchronized models to successfully forecast most of the largest earthquakes generated by the first model. This forecasting strategy outperforms others that only take into account the earthquake series. Our results suggest that probably a good way to synchronize more detailed models with real faults is to force them to reproduce the sequence of previous earthquake ruptures on the faults. This hypothesis could be tested in the future with more detailed models and actual seismic data.  相似文献   

Evidence for a seismic activity mainly constituted of hybrid events at Cayambe volcano,Ecuador. Interpretation in a iced-domes volcano context     

Bertrand Guillier  Jean-Luc Chatelain 《Comptes Rendus Geoscience》2006,338(8):499-506

The high activity level of Hybrid Events (HE) detected beneath the Cayambe volcano since 1989 has been more thoroughly investigated with data from a temporary array. The unusual HE spectral content allows separating a high-frequency signal riding on a low-frequency one, with a probable single source. HEs are interpreted as high frequency VT events, produced by the interaction between magmatic heat and an underground water system fed by thaw water from the summital glacier, which trigger simultaneous low-frequency fluid resonance in the highly fractured adjacent medium. Pure VTs are interpreted as ‘aborted’ HEs occurring probably in the oldest and coldest part of the volcano complex. To cite this article: B. Guillier, J.-L. Chatelain, C. R. Geoscience 338 (2006).  相似文献   

Great earthquakes of variable magnitude at the Cascadia subduction zone   总被引：1，自引：0，他引：1  

Alan R. Nelson  Harvey M. Kelsey 《Quaternary Research》2006,65(3):354-365

Comparison of histories of great earthquakes and accompanying tsunamis at eight coastal sites suggests plate-boundary ruptures of varying length, implying great earthquakes of variable magnitude at the Cascadia subduction zone. Inference of rupture length relies on degree of overlap on radiocarbon age ranges for earthquakes and tsunamis, and relative amounts of coseismic subsidence and heights of tsunamis. Written records of a tsunami in Japan provide the most conclusive evidence for rupture of much of the plate boundary during the earthquake of 26 January 1700. Cascadia stratigraphic evidence dating from about 1600 cal yr B.P., similar to that for the 1700 earthquake, implies a similarly long rupture with substantial subsidence and a high tsunami. Correlations are consistent with other long ruptures about 1350 cal yr B.P., 2500 cal yr B.P., 3400 cal yr B.P., 3800 cal yr B.P., 4400 cal yr B.P., and 4900 cal yr B.P. A rupture about 700-1100 cal yr B.P. was limited to the northern and central parts of the subduction zone, and a northern rupture about 2900 cal yr B.P. may have been similarly limited. Times of probable short ruptures in southern Cascadia include about 1100 cal yr B.P., 1700 cal yr B.P., 3200 cal yr B.P., 4200 cal yr B.P., 4600 cal yr B.P., and 4700 cal yr B.P. Rupture patterns suggest that the plate boundary in northern Cascadia usually breaks in long ruptures during the greatest earthquakes. Ruptures in southernmost Cascadia vary in length and recurrence intervals more than ruptures in northern Cascadia.  相似文献   

New Approach for Estimation of Static and Seismic Active Earth Pressure   总被引：1，自引：1，他引：1  

Deepankar Choudhury  Shailesh Singh 《Geotechnical and Geological Engineering》2006,24(1):117-127

To estimate static and seismic active earth pressure (P_ad) on a rigid retaining wall, numerical analyses using different step sizes have been carried out in this paper, based on the modified Culmann line method by considering Coulomb’s planar rupture surface. Equivalent pseudo-static seismic forces are considered in the analysis. A new concept of modified unit weight by considering ground surcharge is introduced under static and seismic conditions. By numerical analysis, area of soil (A) has been estimated to obtain the ratio of A/A₀ where A₀ is θh², θ is the angle between retaining structure and ground surface and h is the vertical height of the wall. This ratio remains constant for a particular type of soil and has been used to estimate the maximum active earth pressure using force diagram. Results are provided in tabular form for easy calculation of the coefficient of static and seismic active earth pressure. Present results by considering the new technique, compares well with the results obtained by earlier researchers.  相似文献